
|
|
|
Over 2000
products online...
|
|
|
 |
|
|
 |
|
|
|
|
|
Redo Floors Yourself
by Lee Dobbins
Everybody loves the look of hardwood floors, but if you have an
older home, your floors are probably scuffed, scratched and
dingy. Most homes made before 1970 had hardwood floors and even
though your house now has carpet there may be a beautiful
hardwood floor hiding under your rug!
After years of use, your floor will need to be refinished and
that can cost over $1000 for just one room! But if you want to
put in a little time and elbow grease, you can refinish the
floor yourself and have the beautiful look of warm wood in your
home for a fraction of the cost.
Contrary to what you may have heard, the finish doesn’t take
weeks to dry. It’s quite simple actually. You can get the
supplies for sanding at your neighborhood home improvement
store. You’ll need a drum sander and a belt sander. They will
be able to advise you on the sandpaper you need, how to use the
machine and what kind of stain and finish you’ll need to finish
off the floor. Sanding creates fine particles of dust that will
get everywhere and on everything so you may want to pick up some
dust masks and drop cloths while you are at it.
The first thing you’ll want to do when refinishing your floor
yourself is to learn how to run the sander. The key to
stripping a floor is learning how to get the sander working
smoothly. The sanders are very easy to use. But they’re a bit
on the loud side. The key is to keep it moving at all times.
The sander gets very hot and if you stop in one spot for any
length of time, you run the risk of burning or denting your
floor.
Running the sander is the fun part of refinishing, but you must
be cautious as the machine is self propelled. You may feel like
a Zamboni driver smoothing ice after you get the hang of it!
When you start it up, hold on firmly and make sure you keep it
in control at all times.
After the old finish is removed, you need to apply the stain
and new finish. Think of this as the same as doing your nails ?
first you remove the old finish, then basecoat, color and
topcoat. Sometimes you don’t want color on your nails so you
skip that part. In your floor you might also skip that part
(the stain) but you still want to use a finish to protect the
floor.
When it comes to the finish you have 2 choices ? oil based or
water based. Oil-based is available in a satin, semi-gloss or
gloss finish. Satin works well on a hardwood floor because it
will bring out the natural glow of the wood without too much of
a shine as well as help hide any flaws. Oil-based also produces
a warm amber look that gives you the traditional glow of wood
floors. Water-based polyurethane dries clear and resists
yellowing. Water-based also dries quicker.
Either way, make sure you let each coat dry thoroughly before
applying the next. Follow the manufacturers instructions on the
product for drying times. Give your floor at least 24-36 hours
before moving furniture back on it. It will continue to harden
in the first couple of weeks.
Refinishing your floor is simply a set of tasks which can be
done easily if you take them one step of a time. Your flooring
can get a whole new look for less when you refinish it yourself
? you’ll save over 80 percent of the cost.
Lee Dobbins is contributing writer at
www.flooring-info-online.com where you can find out more about
how to choose flooring for your home.
Please visit
http://www.isnare.com/?s=author&a=Lee+Dobbins
|
|
|
|
 |
|
|
 |
|
 |
 |